Click image to view full size image
| 1、Production Overview: | ||||
| a) AH slurry pump casing carries replaceable wear-resistant metal or rubber liners. The impellers are made of wear-resistant metal or rubber. The liner of pump body and impeller for HH pump are made of hard metal only. b) Bearing assembly is adoptable of cylindrical structure, it is easy to adjust the space between impeller and front liner .Can be removed completely when repaired. Bearing assembly use grease lubrication. c) The shaft seal could use the packing seal, expeller seal and mechanical seal. d) The pump discharge direction can be positioned at intervals of 45 degrees as request and oriented to any eight positions to suit installations and applications. e) Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. | ||||
| 2、Main Features: | ||||
| a) Replaceable wear-resistant and corrosion-resistance rubber liners, b) Cylindrical bearing assembly, can be removed completely c) Grease lubrication d) Discharge branch positioned at intervals of 45 degrees and oriented to any eight positions e) Higher cost-effective | ||||
| 3、Main Usages | ||||
| AHR slurry pump is used for delivering slurry with strong abrasion and high concentration for metallurgy, mines, coal and power plant, etc. | ||||
| 4、Technical Parameter: | ||||
| a) Caliber: DN25-DN450mm b) Flow:6.5-5000m3/hr c) Head:5-55 m d) Rotate speed:4000-3400r/min e) Motor power:15-300 KW f) Material: A05 , A31 , A33 , A49 , etc | ||||
slurry pump rubber impeller 6/4E-AHR
